Element for prefabricated elements made of concrete. It is fully embedded in the prefabricated element. Then the blue nut is unscrewed from the concrete with a screwdriver and the gray part remains in the concrete. The grey part has a thread into which metal hooks are screwed in order to lift the concrete slabs with a crane.
A cone with a water bulkhead is used during reinforced concrete work for the independent installation of a waterproof ties passage. Thanks to it, it is possible to modify the PVC tube to a length that is 8 cm shorter than the wall thickness.
Available dimensions:
- Oktagon cone 22/26
The flupp cone is a complete sealing system for PVC spacer tubes that protects from water pressure and prevents the transfer of vibrations to the fixing element. Thanks to the complete system, an installation is really quick and pleasant. It is possible to buy just a flupp plug without a cone.
Available dimensions:
- 20 mm
- 22 mm
- 26 mm
- 32 mm
Washer mainly used for prefabrication for load on the entire surface:
Available dimensions:
- 70×70 thickness: we have all thicknesses
A plug for sealing the ends of the PVC tube.
Available dimensions for tubes of Ø fi=
- 16 mm
- 18 mm
- 20 mm
- 22 mm
- 26 mm
- 30 mm
- 32 mm
Plugs for plugging empty technological holes for tie rods. It fits better in the tube thanks to the ribbed construction.
Available dimensions for holes of Ø fi=
- 22 mm
Connector for concrete and PVC tubes. It enables you to form connections of non-standard lengths.
Available dimensions:
- Ø 22 mm
- Ø 24 mm
The “KONUS” PVC cone can be attached to the ends of tubes, thus protecting anchors.
Available dimensions:
- 22 mm
RING PILIN*
The plastic RING spacer is the most popular one for vertical reinforcement
Available dimensions:
- 22 mm for bar Ø 4-12 mm
- 25 mm for bar Ø 4-12 mm
- 25D mm for bar Ø 8-16 mm
- 30 mm for bar Ø 4-16 mm
- 35 mm for bar Ø 4-16 mm
- 40 mm for bar Ø 5-20 mm
- 50 mm for bar Ø 8-20 mm
Plastic spacer very popular in horizontal reinforcement due to its applicability.
Available dimensions:
- 15/20/25 mm
- 20/25/30/35 mm
- 40/50 mm
Wide spacers for lightweight reinforcement with very good concrete flow. The pointed spike footing minimises contact with the formwork – the best result are obtained for face concrete. The vertical sides at the top prevents the reinforcement from sliding off.
We offer all shapes and dimensions.
Druntereck*
Druntereck hack*
Druntereck hack2*
Listwa ISO*
Spacer tube with a porous outer design. During concreting, it protects the anchor from damage and enables you to pull out a tie rod easily and quickly after formwork removal.
Available dimensions:
- 22/26 mm L= 2000 mm
- 22/26 mm L= 2500 mm
- 22/25 mm L= 2000 mm
- 22/25 mm L= 2500 mm
- 26/32 mm L= 2000 mm
- 26/32 mm L= 2500 mm
- 32/36 mm L= 2000 mm
- 32/36 mm L= 2500 mm
The most commonly used board for inverted C-shaped ceiling reinforcement, the board can be used to quickly and easily position reinforcement in any configuration for an optimum structural strength.
Available dimensions:
- 15 mm L= 2000 mm
- 20 mm L= 2000 mm
- 25 mm L= 2000 mm
- 30 mm L= 2000 mm
- 35 mm L= 2000 mm
- 40 mm L= 2000 mm
- 50 mm L= 2000 mm
The ceiling reinforcement strip is made of plastic and has a specific zigzag shape.
Available dimensions:
- 15 mm L= 2000 mm
- 20 mm L= 2000 mm
- 25 mm L= 2000 mm
- 30 mm L= 2000 mm
- 35 mm L= 2000 mm
- 40 mm L= 2000 mm
- 50 mm L= 2000 mm
The most commonly used solid board for ceiling reinforcement, the board can be used to quickly and easily position reinforcement in any configuration for an optimum structural strength.
Available dimensions:
- 15 mm L= 2000 mm
- 20 mm L= 2000 mm
- 25 mm L= 2000 mm
- 30 mm L= 2000 mm
- 35 mm L= 2000 mm
- 40 mm L= 2000 mm
- 50 mm L= 2000 mm
Modern ceiling reinforcement board made of PP (Polypropylene), which guarantees quality, stability and high resistance to weather conditions; boards can be joined to obtain any length you want.
Available dimensions:
- 15 mm L= 2000 mm
- 20 mm L= 2000 mm
- 25 mm L= 2000 mm
- 30 mm L= 2000 mm
- 35 mm L= 2000 mm
- 40 mm L= 2000 mm
- 50 mm L= 2000 mm
DRUWA*
Edge chamfer board for concrete elements made of a high-strength, impact-resistant plastic. The chamfered corner of the concrete element remains intact during formwork removal. The solid version also available
Available dimensions:
- 10 mm L= 2500 mm
- 15 mm L= 2500 mm
- 20 mm L= 2500 mm
- 25 mm L= 2500 mm
- 30 mm L= 2500 mm
Edge chamfer board for concrete elements made of a high-strength, impact-resistant plastic with a strip for easier fitting to the formwork. The chamfered corner of the concrete element remains intact during formwork removal. The solid version also available
Available dimensions:
- 10 mm L= 2500 mm
- 15 mm L= 2500 mm
- 20 mm L= 2500 mm
- 25 mm L= 2500 mm
- 30 mm L= 2500 mm
Oktagon and Oktagon+ are a ready-to-use one-piece system. It protects the anchor against damage and enables you to pull out a tie rod easily and quickly after formwork removal. An added advantage is the water baffle provided as a flange, which ensures excellent watertightness at concreting without the need for adhesive, confirmed by tests (certificate). Made of a high-strength plastic HDPE.
- Water leak test
- Reaction to fire F180
- Suitable for potable water
- Resistant to aggressive chemicals and pollutants
Available dimensions:
- 15 – 150 mm wall
- 20 – 200 mm wall
- 24 – 240 mm wall
- 25 – 250 mm wall
- 30 – 300 mm wall
- 35 – 350 mm wall
- 40 – 400 mm wall
- 60 – 600 mm wall
WST15 profile*
AB profile*
